How to Service a Seagate hard drive eror

In fact I often find this case, namely the Seagate konslet hard disk. Konsletnya hard drive is causing the power supply also died or to the protectionism and any computer can not be turned on. You might have ever or are currently experiencing this, namely your seagate hard drive konslet, when a lot of data stored in the hard disk. How do I service the seagate konslet hard disk?

Here I will try sharing about how to service a hard drive seagate konslet.

Seagate hard drive causes a Konslet:
The presence of excess voltage of the power supply to the hard drive (Over Voltage)

Preparation Tool:

• Screwdriver Star: to open the screw board hard drive.
• The Multitester to check components: diodes damaged.
• Solder and lead: used to replace components damaged wrote.
• Spare part diode 1A-2A: buy at electronics.

How to Service a Seagate hard drive error:

• For the layout of the components are konslet hard drive is on the inside, you need to open a board inside the hard drive

• For the konselet hard drive components already seen directly, you do not need to open up the board.
• Konselet on harddisk Seagate this often happens at the safety voltage of 12 volt DIODES. Voltage 12 voltnya i.e. suply power cable which is yellow. While the voltage is 5 volts red wires. Sometimes a safety DIODE voltage 5 volts have also been konslet but rarely.

• Check the DIODE voltage safety voltnya 12. also check the DIODE 5 safety voltnya. look at the picture.
• Immediately replace the harddrive konselet diodes. with 1-2 Ampere diode, electronic shops to buy much. Note the position of the anode and cathode is. In fact by just removing the damaged diode without replacing them, your hard drive will be back to normal. In this way, however I do not recommend, because without the diode means without protection if there is over voltage/excess voltage.

How to open a File/Folder Access Denied

This time the post is about how to open the File/Folder Access Denied. The cause of the Folder/File Access Denied or can't be opened:  The file or Folder was created on an NTFS file system that changes the Security ID. Or you may never give the password on your Windows, then you do a reinstall of Windows. As a result there was a Folder/File Access Denied that cannot be opened.

How to open a File/Folder Access Denied:

• Open The Windows Explorer = > Click Tools = > > = View Folder Options
• Uncheck Use simple file sharing (Recommended) = > click OK

• Right click on folder locked: the example name of the folder "System Volume Information"]
• Select Properties = > Security. (If there are warning click OK)
• Click Advanced = > Owner = > will appear the following window:

• Click The User Name Administrator,
• Tick in lieu of the Owner of Subcontainer and Objects.
• Then Click OK/YES
• And finally your folders/files Access Denied will be opened again.