Computer and Printer solutions: CL811

Showing posts with label CL811. Show all posts

How to troubleshoot a Keyboard and Mouse not detected

Ando Zonk share how to cope with a Keyboard and Mouse is not detected. This case may often experienced by many people. Here's how:

The cause of the Keyboard and Mouse are not detected:
1. The possibility of the keyboard or mouse is indeed damaged.
2. Possibility of keyboard or mouse port on the mainboard damaged.

For keyboard or mouse yg is broken, we just replace the keyboard or mouse aja yg the damaged

As for the keyboard or mouse port on the mainboard damaged yg there are several possibilities:

1. keyboard mouse Port is already loose, so the connection is not perfect. This can occur if we are often off the plug of the keyboard or the mouse.
The solution is to replace the keyboard mouse port.

2. Voltage 5 volts for power supply keyboard missing. Usually caused by parts with the symbol L yg breaking up. components with the symbol L is the same fuse. It is located around the keyboard port, usually behind him. This component checks, if damaged replace or directly connect the cable wire, wrote with 1 seed.

Or if you have trouble to replace chipnya, aja sharing connector USB to PS-2.

Good Jobs

How to Service a Seagate hard drive eror

In fact I often find this case, namely the Seagate konslet hard disk. Konsletnya hard drive is causing the power supply also died or to the protectionism and any computer can not be turned on. You might have ever or are currently experiencing this, namely your seagate hard drive konslet, when a lot of data stored in the hard disk. How do I service the seagate konslet hard disk?

Here I will try sharing about how to service a hard drive seagate konslet.

Seagate hard drive causes a Konslet:
The presence of excess voltage of the power supply to the hard drive (Over Voltage)

Preparation Tool:

Screwdriver Star: to open the screw board hard drive.
The Multitester to check components: diodes damaged.
Solder and lead: used to replace components damaged wrote.
Spare part diode 1A-2A: buy at electronics.

How to Service a Seagate hard drive error:

For the layout of the components are konslet hard drive is on the inside, you need to open a board inside the hard drive

For the konselet hard drive components already seen directly, you do not need to open up the board.
Konselet on harddisk Seagate this often happens at the safety voltage of 12 volt DIODES. Voltage 12 voltnya i.e. suply power cable which is yellow. While the voltage is 5 volts red wires. Sometimes a safety DIODE voltage 5 volts have also been konslet but rarely.

Check the DIODE voltage safety voltnya 12. also check the DIODE 5 safety voltnya. look at the picture.
Immediately replace the harddrive konselet diodes. with 1-2 Ampere diode, electronic shops to buy much. Note the position of the anode and cathode is. In fact by just removing the damaged diode without replacing them, your hard drive will be back to normal. In this way, however I do not recommend, because without the diode means without protection if there is over voltage/excess voltage.

How to Reset Canon E400 error 5B00 blink 7 x

Printer Canon E400 is a setype printer with MG2570. It's just another used, Catrid and catrid is also greater capacity so as to allow printing of up to 300 sheets in 1 catrid it. Printer Canon E400 also has a limit on the counter, so if the counter has reached maximum limit (approximately 2 RIM more) then error 5B00 Canon E400 will blink 7 x and have to reset.

Unfortunately for Canon E400, until this article was created March 12, 2015, yet there are also resetternya as the previous version of sotware. Resetter V3400 unable to reset printer Canon type E400 is.

Here's how to resolve error 5B00 Canon E400:
1. take the board printernya
2. replace existing IC508 on the back of lucrative 5B00 error E400 Board or blink 7 x,

This is ic 508wp IC counter, its function is to record the number of times print printer Canon E400 is. If the count reaches the maximum limit of sdh counternya, IC508 must be in the program restart (reset), and the way it is now is with hardware reset because there is no qualified resetter sotware.

3. Loose Plug 508WP IC Solder, with Steam/Blower or use regular solder can also be
4. Completed, plug Board, a raft of printer, ready to try.

So how to Reseter Canon error 5B00 E400 or blink 7 x

JARUM KNEE UKURAN 2.5 CM UNTUK CISS

Selama ini Cartridge Original selalu dapat menghasilkan Hasil Print yang maksimal dan sempurna. Ini disebabkan karena busa di dalam Cartridge Original Canon atau HP benar-benar terisi penuh tintanya sampai ke dalam busanya saat diproduksi pabrik Canon/HP.

Sekarang banyak alat modifikasi Printer Canon/HP yang menggunakan Knee L hanya mengisi tinta pada busa dari Permukaan Atasnya saja. Hal ini menyebabkan busa di dalam Cartridge belum menyerap/terisi tintanya 100% penuh.

Solusinya adalah dengan Jarum Knee CISS Cartridge Canon atau HP. Jarum ini sangat bermanfaat untuk mengatur aliran tinta yang mengalir ke Cartridge Canon atau HP. Dengan menggunakan Jarum Knee CISS ini, tinta akan meresap total di Busa Cartridge, sehingga hasil cetak akan benar-benar maksimal karena sirkulasi tinta di dalam cartridge lebih stabil dan 100% terisi Penuh seperti dari pabrik Canon/HP.

Support Cartridge :
CANON : PG-40, CL-41, PG-810, PG-830, CL-811, CL-831, PG745, CL746, DLL.

HP : HP-21, HP-22, HP-27, HP-28, HP-60, HP802 DLL

Pengganti DIODA SB160 EPSON SR160

Dioda SR 160 bulat untuk mengatasi board epson yang mati
Dioda SR 160 adalah jenis dioda schottky
Jangan ganti dengan dioda biasa, karena akan membuat IC Motor Toshiba Rusak dan printer bunyi nyit-nyit-nyit....
Cocok digunakan untuk printer Epson C90, Epson T11, Epson T20E, Epson T13, Epson TX121, Epson L100, Epson L200, Epson ME32, Epson ME340 Dll.