How to reset a Printer Canon ix6560 error 5b00

If you are having ix6560 Canon Printer error 5b00, it indicates the printer need to be reset. How do I reset ix6560?

Here's how to Reset ix6560 error 5b00. I share it for free:

How to Reset ix6560 error 5b00:

• Download Resetter ix6560 error 5b00 on this LINK.
• Printer Canon ix6560 have to be in a State of SERVICE MODE. Do I read the next step.
• The printer is in a State of death
• Press and hold the STOP/RESET button followed by pressing the POWER button. So the two buttons depressed position.
• Off button STOP/RESET but not off POWER button.
• In the circumstances the POWER button still depressed, press the STOP/RESET button as much as 6 times.
• Then release both buttons simultaneously. Then ix6560 yg error 5b00 Service conditions will be in fashion.
• Your computer will detect the new hardware.
• Exctract it and run your ix6560 results download Resetter.
• In Clear ink absorber counter menu select Play then click the SET on the right.
• Ink absorber counter in menu select Play then click the SET on the right.
• If an error 002 etc click sets, change-change the menu option in the ink absorber Counter, trus click set up lucrative 5b00 error ix6560 successfully reset.
• Then click the EEOPROM. then the printer will print a 1 page.
• ix6560 5b00 error will return to normal.

so thank you

Penyebab FUSE EPSON 3MM Rusak

Berfungsi sebagai pengaman mainboard printer apabila terjadi konslet / hubung singkat pada mainboard printer yang mati total

Berikut merupakan beberapa penyebab putusnya fuse pada printer :
Disebabkan oleh tegangan listrik naik turun dari PLN (AC 220).
Colokan kabel ke stop kontak kendor atau sebaliknya yang kurang pas.
Kebanjiran tinta yang mengenai sistem board dinamo sensor tinta bocor sehingga mengenai head dan menyampaikan perintah error.
Kebanjiran tinta pada dudukan chip dan chip cartridge. Head error atau jebol. Kabel fleksibel terkena tinta sehingga menyebabkan konslet putus.
Kerja mekanik yang selalu terganggu/sering nyantol membuat sistem bekerja kelebihan panas dan akhirnya fuse putus.
Salah pasang head, miring, kurang pas pada dudukannya.
Kabel power belum dilepas saat pemasangan head.