How to troubleshoot a Keyboard and Mouse not detected

Ando Zonk share how to cope with a Keyboard and Mouse is not detected. This case may often experienced by many people. Here's how:

The cause of the Keyboard and Mouse are not detected:
1. The possibility of the keyboard or mouse is indeed damaged.
2. Possibility of keyboard or mouse port on the mainboard damaged.

For keyboard or mouse yg is broken, we just replace the keyboard or mouse aja yg the damaged

As for the keyboard or mouse port on the mainboard damaged yg there are several possibilities:

1. keyboard mouse Port is already loose, so the connection is not perfect. This can occur if we are often off the plug of the keyboard or the mouse.
The solution is to replace the keyboard mouse port.

2. Voltage 5 volts for power supply keyboard missing. Usually caused by parts with the symbol L yg breaking up. components with the symbol L is the same fuse. It is located around the keyboard port, usually behind him. This component checks, if damaged replace or directly connect the cable wire, wrote with 1 seed.

Or if you have trouble to replace chipnya, aja sharing connector USB to PS-2.

Good Jobs

How Resetter Epson SX400 and TX400

Good morning this time Ando Zonk will tell about how Resetter Epson SX400 and TX400. How Resetter Epson resetter software is using the TX400 TX400 and SX400. This Resster I have tried and succeeded.

How Resetter Epson SX400 and TX400

1. The first step of course epson SX400 and TX400 printer must be already installed drivers. To Download its driver in epson driver download

2. Download software resetter Epson SX400 TX400 and first. Software Resetter Epson named TX400 SX400, and you can download it here Click

3. Important!!! Turn off your Antivirus, because it detected resetter T13 modifications as viruses by antivirus.

4. run the program resetter Epson SX400 TX400 and with double click "URLoader.exe", do not directly at "URAdjProg.exe" because the program will not run if directly from "URAdjProg.exe"

See the image below:

Check: used to check maximum 7800 counter point, you can see it on the main pad counter. If more or close to 7800 points means the printer needs to be reset in the

Initialization: used to reset the printer counter back or mengenolkan

Once finished turn off printer and turn on again. The printer will be alive with lights in green. Means Epson printer and TX400 SX400 which blink last is ready to use again.

How To Cope With The Air In The Hose Drip Canon

Often we encounter printer Canon Infusion that has the problem of air trapped in the hoses an infusion. Of course this will lead to not lancarnya the flow of ink from cartridge to drip tube. print results and consequently be imperfect, for example print the dotted, striped, there are colors that don't come out, and so on.

Why the air can enter in Canon infusion hose?
The air in the hose drip Canon caused by the existence of a gap between the catrid hole and rubber hose place drip infusion into catridge. Or more simply put, connection hose and catrid "loose". This vulnerability occurs because catrid does not match the hole rubber, because at the time repeatedly catrid by simply soldering/eye drill that does not correspond to the diameter of the rubber and knee infusion. As a result, the air will gradually be able to fit in a hose drip.

Equipment To Cope With The Air In The Hose Drip Canon:

• Glue 
• Canon Catrid Vacuum Toolkit

How To Cope With The Air In The Hose Drip Canon:

Prepare the Glue  (do not use glue ALTECO, can damage plastic)
Take the hose off and do not Catrid infusnya.
Glue the parts of the suburbs of catrid hole place hose in, try not to get in the air.
Allow the Glue to dry out first.
Open the lid of a respiratory tube Infusion
Prepare a Toolkit of vacuum Catrid Canon, then plug the Catrid into the Toolkit.
Plug the SPUIT/Injections without a needle into the rubber hole on the bottom of the Vacuum Catrid Toolkit.
Then tintanya to suck air in the hose is missing.
The printer is already Ready.

Advice to avoid problems occur Air hoses included in the infusion:
Use an appropriate infusion of drill diameter rubber hose L place Drip infusion. This drill has a size of diameter of 2.2 mm

How to resolve Error 5011 canon MP258, MP287, MP237

Printer Canon MP-series are Multifunction printers, that can be used to Print, Scan and Copy. Problems that arise on the type of printer MP especially MP258, MP287, and MP237 is error 5011 when used to print. How do I solve it?

How to resolve Error 5011 canon MP258, MP287, MP237
Error 5011 Canon MP258, MP287, MP237 caused by the scanner isn't working, so the logic board to detect this damage and displays the message error 5011 or P22.

The cause of the Error 5011 Canon MP258, MP287, MP237:

1. Scanner unit faulty, handling: need replacement scanner.

2. The movement of the scanner is disturbed, it can happen due to dirty, try clean the part scannernya

3. data cable Flexible Scanner there is a break up or shift. Loose cable, clear, and plug it in again. If there is a nice break up, replace the cord

4. The Printer Mainboard no damage part block scanner, means need a replacement boardnya.

To find out the cause of the damage to one of the above, you should have a spare part OK used to try.

Such an explanation how to resolve an Error 5011 canon MP258, MP287, MP237

Resetter Printer Epson L110 L210 L300, L350 L355

Resetter Printer Epson
Epson L110 L210 L300, L350 L355 Epson generation was the use of infusion system.
It also did not escape the printer from epson, that protection will cease to print if hitungannnya is already full.
And that's when Epson L110 L210 L300 L350 L355 have reset Software.

Here is the Download link Resetter Epson L110 L210 L300 L350 L355:

Link Download

How to Reset Canon E400 error 5B00 blink 7 x

Printer Canon E400 is a setype printer with MG2570. It's just another used, Catrid and catrid is also greater capacity so as to allow printing of up to 300 sheets in 1 catrid it. Printer Canon E400 also has a limit on the counter, so if the counter has reached maximum limit (approximately 2 RIM more) then error 5B00 Canon E400 will blink 7 x and have to reset.


Unfortunately for Canon E400, until this article was created March 12, 2015, yet there are also resetternya as the previous version of sotware. Resetter V3400 unable to reset printer Canon type E400 is.

Here's how to resolve error 5B00 Canon E400:
1. take the board printernya
2. replace existing IC508 on the back of lucrative 5B00 error E400 Board or blink 7 x,

This is ic 508wp IC counter, its function is to record the number of times print printer Canon E400 is. If the count reaches the maximum limit of sdh counternya, IC508 must be in the program restart (reset), and the way it is now is with hardware reset because there is no qualified resetter sotware.

3. Loose Plug 508WP IC Solder, with Steam/Blower or use regular solder can also be
4. Completed, plug Board, a raft of printer, ready to try.

So how to Reseter Canon error 5B00 E400 or blink 7 x

How to reset a Printer Canon ix6560 error 5b00

If you are having ix6560 Canon Printer error 5b00, it indicates the printer need to be reset. How do I reset ix6560?

Here's how to Reset ix6560 error 5b00. I share it for free:

How to Reset ix6560 error 5b00:

• Download Resetter ix6560 error 5b00 on this LINK.
• Printer Canon ix6560 have to be in a State of SERVICE MODE. Do I read the next step.
• The printer is in a State of death
• Press and hold the STOP/RESET button followed by pressing the POWER button. So the two buttons depressed position.
• Off button STOP/RESET but not off POWER button.
• In the circumstances the POWER button still depressed, press the STOP/RESET button as much as 6 times.
• Then release both buttons simultaneously. Then ix6560 yg error 5b00 Service conditions will be in fashion.
• Your computer will detect the new hardware.
• Exctract it and run your ix6560 results download Resetter.
• In Clear ink absorber counter menu select Play then click the SET on the right.
• Ink absorber counter in menu select Play then click the SET on the right.
• If an error 002 etc click sets, change-change the menu option in the ink absorber Counter, trus click set up lucrative 5b00 error ix6560 successfully reset.
• Then click the EEOPROM. then the printer will print a 1 page.
• ix6560 5b00 error will return to normal.

so thank you

Penyebab FUSE EPSON 3MM Rusak

Berfungsi sebagai pengaman mainboard printer apabila terjadi konslet / hubung singkat pada mainboard printer yang mati total

Berikut merupakan beberapa penyebab putusnya fuse pada printer :
Disebabkan oleh tegangan listrik naik turun dari PLN (AC 220).
Colokan kabel ke stop kontak kendor atau sebaliknya yang kurang pas.
Kebanjiran tinta yang mengenai sistem board dinamo sensor tinta bocor sehingga mengenai head dan menyampaikan perintah error.
Kebanjiran tinta pada dudukan chip dan chip cartridge. Head error atau jebol. Kabel fleksibel terkena tinta sehingga menyebabkan konslet putus.
Kerja mekanik yang selalu terganggu/sering nyantol membuat sistem bekerja kelebihan panas dan akhirnya fuse putus.
Salah pasang head, miring, kurang pas pada dudukannya.
Kabel power belum dilepas saat pemasangan head.