Computer and Printer solutions: DIODA SB160 EPSON SR160

Showing posts with label DIODA SB160 EPSON SR160. Show all posts

How To Troubleshoot Canon Clogged Catrid II

This article is a continuation of how to overcome the Catrid Canon clogged.

If the print is still striped or dotted, dashed
1. open the top cover of the forced catrid.
2. take Gabusnya
3. ink all over didalmnya, Kuras and fill with liquid Cleaner (if no can be replaced with glass cleaner yg mixed with 20% alcohol) and let sit for 1 night
4. Suction tip head catrid by using a Toolkit of vacuum catrid Canon
5. enter again the Cork, and the full content of his ink.
6. Check outboard ends of the handkerchief head, if it is out of ink cartridge, all ready to try.
7 if the ink still hasn't come out all during the paste are siphoned off, repeat handkerchief.

When the tip of the head catrid canon in paste, ink drying was out all print results, but still streaked with dotted or dashed. Canon catrid means you're weak on his heater. And his one-one best way is to replace your canon catrid. Because in these conditions, the canon cartridge is no longer preserved.

How Resetter Canon IP2870 5B00 blink 7 x

How to reset canon IP2870 error 5B00 blink 7 x. Ip2870 there is a new variant of the Canon ip2770, exiting after sex with his brother boardnya machine MG2570 that comes with the scanner.

The name of the printer Canon certainly did not escape from the case of absorber full, so also ip2870 also definitely experiencing error 5B00 and blink 7 x or absorber full. software resetter create ip2870 error 5B00 also does not exist. So the only way is to reset the IC his manually. Unlike the canon MG2570, ip2870 do not have a separate COUNTER IC, Counternya IC one with so the BIOS or Firmware. So to reset the ip2870 error 5B00 to date must be reset with the IC or IC replace me on the content of the new firmware. For IC BiOS ip2870 can be bought at

Here's how to reset Ip2870 error 5B00 blink 7 x:

1. open the chassis up, and grab the board printernya

2. Off the IC I've circled, replace with a new IC and already filled Files new Eproom.

3. the ip2870 Printer error 5B00 blink 7 x will be back to normal.

So how resetter Canon IP2870 error 5B00 blink 7 x, may be useful for all of us. And good luck good luck

How to reset a Printer Canon ix6560 error 5b00

If you are having ix6560 Canon Printer error 5b00, it indicates the printer need to be reset. How do I reset ix6560?

Here's how to Reset ix6560 error 5b00. I share it for free:

How to Reset ix6560 error 5b00:

Download Resetter ix6560 error 5b00 on this LINK.
Printer Canon ix6560 have to be in a State of SERVICE MODE. Do I read the next step.
The printer is in a State of death
Press and hold the STOP/RESET button followed by pressing the POWER button. So the two buttons depressed position.
Off button STOP/RESET but not off POWER button.
In the circumstances the POWER button still depressed, press the STOP/RESET button as much as 6 times.
Then release both buttons simultaneously. Then ix6560 yg error 5b00 Service conditions will be in fashion.
Your computer will detect the new hardware.
Exctract it and run your ix6560 results download Resetter.
In Clear ink absorber counter menu select Play then click the SET on the right.
Ink absorber counter in menu select Play then click the SET on the right.
If an error 002 etc click sets, change-change the menu option in the ink absorber Counter, trus click set up lucrative 5b00 error ix6560 successfully reset.
Then click the EEOPROM. then the printer will print a 1 page.
ix6560 5b00 error will return to normal.

so thank you

Pengganti DIODA SB160 EPSON SR160

Dioda SR 160 bulat untuk mengatasi board epson yang mati
Dioda SR 160 adalah jenis dioda schottky
Jangan ganti dengan dioda biasa, karena akan membuat IC Motor Toshiba Rusak dan printer bunyi nyit-nyit-nyit....
Cocok digunakan untuk printer Epson C90, Epson T11, Epson T20E, Epson T13, Epson TX121, Epson L100, Epson L200, Epson ME32, Epson ME340 Dll.