Computer and Printer solutions: HP21

Showing posts with label HP21. Show all posts

How To Cope With The Air In The Hose Drip Canon

Often we encounter printer Canon Infusion that has the problem of air trapped in the hoses an infusion. Of course this will lead to not lancarnya the flow of ink from cartridge to drip tube. print results and consequently be imperfect, for example print the dotted, striped, there are colors that don't come out, and so on.

Why the air can enter in Canon infusion hose?
The air in the hose drip Canon caused by the existence of a gap between the catrid hole and rubber hose place drip infusion into catridge. Or more simply put, connection hose and catrid "loose". This vulnerability occurs because catrid does not match the hole rubber, because at the time repeatedly catrid by simply soldering/eye drill that does not correspond to the diameter of the rubber and knee infusion. As a result, the air will gradually be able to fit in a hose drip.

Equipment To Cope With The Air In The Hose Drip Canon:

Glue
Canon Catrid Vacuum Toolkit

How To Cope With The Air In The Hose Drip Canon:

Prepare the Glue (do not use glue ALTECO, can damage plastic)
Take the hose off and do not Catrid infusnya.
Glue the parts of the suburbs of catrid hole place hose in, try not to get in the air.
Allow the Glue to dry out first.
Open the lid of a respiratory tube Infusion
Prepare a Toolkit of vacuum Catrid Canon, then plug the Catrid into the Toolkit.
Plug the SPUIT/Injections without a needle into the rubber hole on the bottom of the Vacuum Catrid Toolkit.
Then tintanya to suck air in the hose is missing.
The printer is already Ready.

Advice to avoid problems occur Air hoses included in the infusion:
Use an appropriate infusion of drill diameter rubber hose L place Drip infusion. This drill has a size of diameter of 2.2 mm

Resetter Printer Epson L110 L210 L300, L350 L355

Resetter Printer Epson
Epson L110 L210 L300, L350 L355 Epson generation was the use of infusion system.
It also did not escape the printer from epson, that protection will cease to print if hitungannnya is already full.
And that's when Epson L110 L210 L300 L350 L355 have reset Software.

Here is the Download link Resetter Epson L110 L210 L300 L350 L355:

Link Download

How to reset a Printer Canon ix6560 error 5b00

If you are having ix6560 Canon Printer error 5b00, it indicates the printer need to be reset. How do I reset ix6560?

Here's how to Reset ix6560 error 5b00. I share it for free:

How to Reset ix6560 error 5b00:

Download Resetter ix6560 error 5b00 on this LINK.
Printer Canon ix6560 have to be in a State of SERVICE MODE. Do I read the next step.
The printer is in a State of death
Press and hold the STOP/RESET button followed by pressing the POWER button. So the two buttons depressed position.
Off button STOP/RESET but not off POWER button.
In the circumstances the POWER button still depressed, press the STOP/RESET button as much as 6 times.
Then release both buttons simultaneously. Then ix6560 yg error 5b00 Service conditions will be in fashion.
Your computer will detect the new hardware.
Exctract it and run your ix6560 results download Resetter.
In Clear ink absorber counter menu select Play then click the SET on the right.
Ink absorber counter in menu select Play then click the SET on the right.
If an error 002 etc click sets, change-change the menu option in the ink absorber Counter, trus click set up lucrative 5b00 error ix6560 successfully reset.
Then click the EEOPROM. then the printer will print a 1 page.
ix6560 5b00 error will return to normal.

so thank you

JARUM KNEE UKURAN 2.5 CM UNTUK CISS

Selama ini Cartridge Original selalu dapat menghasilkan Hasil Print yang maksimal dan sempurna. Ini disebabkan karena busa di dalam Cartridge Original Canon atau HP benar-benar terisi penuh tintanya sampai ke dalam busanya saat diproduksi pabrik Canon/HP.

Sekarang banyak alat modifikasi Printer Canon/HP yang menggunakan Knee L hanya mengisi tinta pada busa dari Permukaan Atasnya saja. Hal ini menyebabkan busa di dalam Cartridge belum menyerap/terisi tintanya 100% penuh.

Solusinya adalah dengan Jarum Knee CISS Cartridge Canon atau HP. Jarum ini sangat bermanfaat untuk mengatur aliran tinta yang mengalir ke Cartridge Canon atau HP. Dengan menggunakan Jarum Knee CISS ini, tinta akan meresap total di Busa Cartridge, sehingga hasil cetak akan benar-benar maksimal karena sirkulasi tinta di dalam cartridge lebih stabil dan 100% terisi Penuh seperti dari pabrik Canon/HP.

Support Cartridge :
CANON : PG-40, CL-41, PG-810, PG-830, CL-811, CL-831, PG745, CL746, DLL.

HP : HP-21, HP-22, HP-27, HP-28, HP-60, HP802 DLL

Pengganti DIODA SB160 EPSON SR160

Dioda SR 160 bulat untuk mengatasi board epson yang mati
Dioda SR 160 adalah jenis dioda schottky
Jangan ganti dengan dioda biasa, karena akan membuat IC Motor Toshiba Rusak dan printer bunyi nyit-nyit-nyit....
Cocok digunakan untuk printer Epson C90, Epson T11, Epson T20E, Epson T13, Epson TX121, Epson L100, Epson L200, Epson ME32, Epson ME340 Dll.