How to troubleshoot a Keyboard and Mouse not detected

Ando Zonk share how to cope with a Keyboard and Mouse is not detected. This case may often experienced by many people. Here's how:

The cause of the Keyboard and Mouse are not detected:
1. The possibility of the keyboard or mouse is indeed damaged.
2. Possibility of keyboard or mouse port on the mainboard damaged.

For keyboard or mouse yg is broken, we just replace the keyboard or mouse aja yg the damaged

As for the keyboard or mouse port on the mainboard damaged yg there are several possibilities:

1. keyboard mouse Port is already loose, so the connection is not perfect. This can occur if we are often off the plug of the keyboard or the mouse.
The solution is to replace the keyboard mouse port.

2. Voltage 5 volts for power supply keyboard missing. Usually caused by parts with the symbol L yg breaking up. components with the symbol L is the same fuse. It is located around the keyboard port, usually behind him. This component checks, if damaged replace or directly connect the cable wire, wrote with 1 seed.

Or if you have trouble to replace chipnya, aja sharing connector USB to PS-2.

Good Jobs

How Resetter Epson SX400 and TX400

Good morning this time Ando Zonk will tell about how Resetter Epson SX400 and TX400. How Resetter Epson resetter software is using the TX400 TX400 and SX400. This Resster I have tried and succeeded.

How Resetter Epson SX400 and TX400

1. The first step of course epson SX400 and TX400 printer must be already installed drivers. To Download its driver in epson driver download

2. Download software resetter Epson SX400 TX400 and first. Software Resetter Epson named TX400 SX400, and you can download it here Click

3. Important!!! Turn off your Antivirus, because it detected resetter T13 modifications as viruses by antivirus.

4. run the program resetter Epson SX400 TX400 and with double click "URLoader.exe", do not directly at "URAdjProg.exe" because the program will not run if directly from "URAdjProg.exe"

See the image below:

Check: used to check maximum 7800 counter point, you can see it on the main pad counter. If more or close to 7800 points means the printer needs to be reset in the

Initialization: used to reset the printer counter back or mengenolkan

Once finished turn off printer and turn on again. The printer will be alive with lights in green. Means Epson printer and TX400 SX400 which blink last is ready to use again.

How To Self Test The Printer Epson

Hallo andi companions this time I post an article about how Epson Printer Self Test

If you often get your printer and servisan are often difficult to test print for having to install all the drivers on your computer, you may need to try this trick.

Here is how to test direct print from printer without passing the computer.

How To Self Test: Epson Printer

Epson printer type:
C series:
C41, C43, C45, C42, C58, C61, C62, C63, C65, C67, C79, C85, C86, C87, etc.

R series:
R210, R230, R270, etc.

• Prepare a paper on the printer unit.
• Press and hold down the paper/resume then press power button

Epson printer type:
CX Series: CX, CX 3600 3500, 5100 CX3700, CX, CX CX, CX 4900 5900, etc

• Prepare a paper on the printer unit.
• Press and hold the power button and then press the ink/ink power light indicator blinks up to 1x and then release the button.

JARUM KNEE UKURAN 2.5 CM UNTUK CISS

Selama ini Cartridge Original selalu dapat menghasilkan Hasil Print yang maksimal dan sempurna. Ini disebabkan karena busa di dalam Cartridge Original Canon atau HP benar-benar terisi penuh tintanya sampai ke dalam busanya saat diproduksi pabrik Canon/HP.

Sekarang banyak alat modifikasi Printer Canon/HP yang menggunakan Knee L hanya mengisi tinta pada busa dari Permukaan Atasnya saja. Hal ini menyebabkan busa di dalam Cartridge belum menyerap/terisi tintanya 100% penuh.

Solusinya adalah dengan Jarum Knee CISS Cartridge Canon atau HP. Jarum ini sangat bermanfaat untuk mengatur aliran tinta yang mengalir ke Cartridge Canon atau HP. Dengan menggunakan Jarum Knee CISS ini, tinta akan meresap total di Busa Cartridge, sehingga hasil cetak akan benar-benar maksimal karena sirkulasi tinta di dalam cartridge lebih stabil dan 100% terisi Penuh seperti dari pabrik Canon/HP.

Support Cartridge :
CANON : PG-40, CL-41, PG-810, PG-830, CL-811, CL-831, PG745, CL746, DLL. 

HP : HP-21, HP-22, HP-27, HP-28, HP-60, HP802 DLL

Pengganti DIODA SB160 EPSON SR160

Dioda SR 160 bulat untuk mengatasi board epson yang mati
Dioda SR 160 adalah jenis dioda schottky
Jangan ganti dengan dioda biasa, karena akan membuat IC Motor Toshiba Rusak dan printer bunyi nyit-nyit-nyit....
Cocok digunakan untuk printer Epson C90, Epson T11, Epson T20E, Epson T13, Epson TX121, Epson L100, Epson L200, Epson ME32, Epson ME340 Dll.

Pengganti DIODA SB160 EPSON SR160

Dioda SR 160 bulat untuk mengatasi board epson yang mati
Dioda SR 160 adalah jenis dioda schottky
Jangan ganti dengan dioda biasa, karena akan membuat IC Motor Toshiba Rusak dan printer bunyi nyit-nyit-nyit....
Cocok digunakan untuk printer Epson C90, Epson T11, Epson T20E, Epson T13, Epson TX121, Epson L100, Epson L200, Epson ME32, Epson ME340 Dll.